I just tried out the Buffalo router running r26910 on a Charter cable uplink for WasabiNet, and sadly it wouldn't take a DHCP lease from the cable modem (which I connected to eth1, aka blue WAN port).  Oddly enough, eth1 does get its DHCP address fine if I attach it to a port on a DD-WRT router I have sitting around, but not the cable modem.<div>
<br></div><div>Has anyone else had similar difficulties using their NFiniti with a wired broadband connection that issues DHCP leases?  I don't have this problem with the Mikrotik rb532a boards running Backfire rc4, when connected to a Charter cable modem.<br>
<div><br><div class="gmail_quote">On Tue, Jul 5, 2011 at 12:30 PM, Brian Duggan <span dir="ltr"><<a href="mailto:bcdugga@gmail.com">bcdugga@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
Support for this router might be stabilizing. OpenWRT trunk r27437<br>
worked for me this weekend, too.<br>
<br>
Brian<br>
<div><div></div><div class="h5"><br>
On 7/3/11 9:01 AM, pablito wrote:<br>
> Wow this is helpful!  For people not building their own, I also had<br>
> luck with a pre-built image as I mentioned on the riseup/crabgrass<br>
> group:<br>
><br>
> I managed to leave DC without the recipe for flashing the Buffalo<br>
> router, so after some experimentation and reading, came to find that<br>
> TFTPing a nightly build from the openwrt<br>
> trunk(<a href="http://downloads.openwrt.org/snapshots/" target="_blank">http://downloads.openwrt.org/snapshots/</a>) worked. I used<br>
> openwrt-ar71xx-generic-wzr-hp-g301nh-jffs2-tftp.bin as<br>
> openwrt-ar71xx-generic-wzr-hp-g300nh-jffs2-tftp.bin didn’t work for<br>
> me.<br>
><br>
> I'm not sure what the .config is for pre-built images, so very happy<br>
> Ben figured out something which works!<br>
><br>
> -p<br>
><br>
> On Sat, Jul 02, 2011 at 10:43:17PM -0500, Ben West wrote:<br>
>> Hi All,<br>
>><br>
>> I just finally got a working instance of OpenWRT r26910 on the<br>
>> Buffalo NFiniti, including the 802.11n radio.<br>
>><br>
>> Do note that Daniel is referring to the "trunk" branch of OpenWRT<br>
>> and not the "backfire" branch.  The latter branch is apparently<br>
>> still missing support for the newer g301nh chipset.<br>
>><br>
>> In particular, this is what I did to checkout / compile the<br>
>> revision of OpenWRT mentioned, with luci and some other stuff<br>
>> enabled.<br>
>><br>
>> I'm also attaching my config for make menuconfig. (I.e unzip this<br>
>> file and name it .config in the root of the OpenWRT repo, before<br>
>> running make world.)<br>
>><br>
>> svn co -r 26910 svn://<a href="http://svn.openwrt.org/openwrt/trunk/" target="_blank">svn.openwrt.org/openwrt/trunk/</a><br>
>> ./trunk-r29610 cd trunk-r29610 cp feeds.conf.default feeds.conf<br>
>> ./scripts/feeds update -a ./scripts/feeds install -a -p luci<br>
>> ./scripts/feeds install -a -p luci-ssl ./scripts/feeds install<br>
>> bmon #copy in .config file make world V=99 #wait for several hours<br>
>><br>
>> I used the tftp method described in the wiki to flash the router.<br>
>> You may have luck using the upgrade page provided with the stock<br>
>> DD-WRT firmware.<br>
>><br>
>> Finally, do note this version of OpenWRT appears to have everything<br>
>> at / mounted read-only.  The writeable overlay is located at<br>
>> /overlay, specifically at /overlay/etc.  If you have to copy a file<br>
>> from /etc over to /overlay/etc, e.g. opkg.conf, you may need to<br>
>> have to reboot to get the writeable file recognized.<br>
>><br>
>> On Mon, Jun 6, 2011 at 5:09 PM, Daniel Bryg <<a href="mailto:fermenthor@gmail.com">fermenthor@gmail.com</a>><br>
>> wrote:<br>
>><br>
>>> Hi everyone,<br>
>>><br>
>>> Here are the promised details of the successful build i made on<br>
>>> Friday during the meeting in DC.<br>
>>><br>
>>> - I used Openwrt trunk r26910. It won't boot with the current<br>
>>> trunk code or the snapshots - r27096 doesn't work either despite<br>
>>> being reported by the router as a result of code merging.<br>
>>><br>
>>> - flashed following the usual tftp steps for Bufallo:<br>
>>> <a href="http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300h" target="_blank">http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300h</a><br>
>>><br>
>>> - you need the wzr-hp-g300nh image the for the older "A0 D0"<br>
>>> model and wzr-hp-g301nh for "A2 F0B"<br>
>>><br>
>>> I'll be continuing these efforts later this week, maybe i'll set<br>
>>> up a code repo. Let me know if you need a link to binaries and<br>
>>> whatnot.<br>
>>><br>
>>> It was great to meet some of you last week.<br>
>>><br>
>>> Cheers, Daniel _______________________________________________<br>
>>> Commotion-dev mailing list <a href="mailto:Commotion-dev@lists.chambana.net">Commotion-dev@lists.chambana.net</a><br>
>>> <a href="http://lists.chambana.net/mailman/listinfo/commotion-dev" target="_blank">http://lists.chambana.net/mailman/listinfo/commotion-dev</a><br>
>>><br>
>><br>
>><br>
>><br>
>> -- Ben West <a href="mailto:me@benwest.name">me@benwest.name</a><br>
><br>
><br>
>> _______________________________________________ Commotion-dev<br>
>> mailing list <a href="mailto:Commotion-dev@lists.chambana.net">Commotion-dev@lists.chambana.net</a><br>
>> <a href="http://lists.chambana.net/mailman/listinfo/commotion-dev" target="_blank">http://lists.chambana.net/mailman/listinfo/commotion-dev</a><br>
><br>
><br>
<br>
--<br>
</div></div><font color="#888888">Brian Duggan<br>
Technical Projects Developer<br>
UC Independent Media Center<br>
<a href="http://www.ucimc.org" target="_blank">http://www.ucimc.org</a> | <a href="tel:631%20223%208442" value="+16312238442">631 223 8442</a><br>
</font><div><div></div><div class="h5">_______________________________________________<br>
Commotion-dev mailing list<br>
<a href="mailto:Commotion-dev@lists.chambana.net">Commotion-dev@lists.chambana.net</a><br>
<a href="http://lists.chambana.net/mailman/listinfo/commotion-dev" target="_blank">http://lists.chambana.net/mailman/listinfo/commotion-dev</a><br>
</div></div></blockquote></div><br><br clear="all"><br>-- <br><div>Ben West</div><div><a href="mailto:me@benwest.name" target="_blank">me@benwest.name</a></div><br>
</div></div>