Hi All,<br><br>Quick notes about putting the Nanosation M2 into tftp (aka recovery mode), and about bridging the adhoc mesh with a wired LAN, below <span style="color:rgb(0,102,0)">in green</span>.<br><br><div class="gmail_quote">
On Fri, Feb 22, 2013 at 10:39 AM, seamus tuohy <span dir="ltr"><<a href="mailto:s2e@opentechinstitute.org" target="_blank">s2e@opentechinstitute.org</a>></span> wrote:<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000"><div class="im"><blockquote type="cite"><div dir="ltr"><div><div>It could be a case of forgetfulness, but I became unable
            access this router via the web interface. The password
            prompt always failed, despite trying every password I know.
            ;)<br>
          </div>
          <div><br>
          </div>
          <div>So time to reset! But holding the master reset button
            (powered on) doesn't seem to have any effect, the
            configuration doesn't wipe / allow me to set a new password.
            I reflashed it.<br>
            <br>
          </div>
        </div>
      </div>
    </blockquote>
    <br></div>
    The reset button simply re-boots a router. It can also be used to
    put the router into tftp mode or with the right combination into the
    default OpenWRT image. You will have to look at the openwrt site for
    the instructions for various routers.<div class="im"><br></div></div></blockquote><div><br><span style="color:rgb(0,102,0)">To my knowledge, it isn't possible to put a UBNT unit into recovery mode via the firmware, or at least not via 3rd party firmware.  The best you can do (besides holding down the reset button manually on power-up), is to use the larger 1Amp POE adapter that comes with an out-board reset button.  I.e. so that you can put the unit into recovery mode after it has been mounted at the inconvenient end of a 100m long cable.<br>
</span> </div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div bgcolor="#FFFFFF" text="#000000"><div class="im">
    <br>
    <blockquote type="cite">
      <div dir="ltr">
        <div>
          <div>This one has been left outdoors for the last month.<br>
            <br>
          </div>
          <div>Luckily I brought a second router with me, so I swapped
            the device, but...<br>
          </div>
          <div><br>
          </div>
          <div>Router #2 issue: Adding bridge interface between mesh and
            LAN interfaces made device inaccessible over LAN interface<br>
          </div>
          <div><br></div></div></div></blockquote></div></div></blockquote><span style="color:rgb(0,102,0)">Do be aware that 'bridging' different interfaces in the traditional sense is not possible under OpenWRT between an adhoc radio and a wired LAN.  This is an intentional limitation of OpenWRT, although Attitude Adjustment now includes the 'trelay' package, which could be used to build virtual bridges.<br>
<br>Besides, I think you're referring not to bridging but adjusting firewall setting so that new incoming connections from the adhoc mesh can reach devices on a the Nanostation's local LAN.  Allowing all such connections could definitely be a security concern, so adding means to selectively whitelist which LAN clients have this connectivity is ideal.<br>
</span><br></div><br>-- <br>Ben West<div><a href="http://gowasabi.net" target="_blank">http://gowasabi.net</a><br><a href="mailto:ben@gowasabi.net" target="_blank">ben@gowasabi.net</a><br>314-246-9434<br></div>