[CUWiN-Dev] RTL8180L

John Atkinson john.atkinson at gmail.com
Fri Nov 11 01:33:51 CST 2005


Skipped content of type multipart/alternative-------------- next part --------------
login as: root
root at 10.87.245.254's password:
NetBSD 3.99.10 (cuw_pc) #10: Wed Nov 2 02:14:34 CST 2005

Welcome to NetBSD!

CUWIN release 0.5.8+ Unofficial, built:20051102 rev:3622
Terminal type is xterm.
We recommend creating a non-root account and using su(1) for root access.
# ifconfig -a
ex0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        capabilities=3f00<IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx,TCP4CSUM_Tx,UDP4CSUM                  _Rx,UDP4CSUM_Tx>
        enabled=0
        address: 00:b0:d0:87:57:f5
        media: Ethernet autoselect (10baseT)
        status: active
        inet 10.87.245.254 netmask 0xffffff00 broadcast 10.87.245.255
        inet6 fe80::2b0:d0ff:fe87:57f5%ex0 prefixlen 64 scopeid 0x1
        inet6 fec0::57f5:2b0:d0ff:fe87:57f5 prefixlen 64
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33192
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
# dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.10 (cuw_pc) #10: Wed Nov  2 02:14:34 CST 2005
        dyoung at cuw.ojctech.com:/u3/dyoung/scratch-radix/O/sys/arch/i386/compile/cuw_pc
total memory = 125 MB
avail memory = 120 MB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), id 0x686
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
NOTICE: this kernel does not support Pentium Pro CPU class
NOTICE: this kernel does not support Pentium CPU class
NOTICE: lowering CPU class to i486
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82815 Hub (rev. 0x02)
pchb0: random number generator enabled
agp at pchb0 not configured
vga1 at pci0 dev 2 function 0: Intel 82815 Graphics (rev. 0x02)
wsdisplay0 at vga1 (kbdmux ignored): console (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
rtw0 at pci1 dev 8 function 0: Realtek RTL8180 802.11 MAC/BBP, revision 2.0
rtw0: interrupting at irq 11
rtw0: hardware version D
rtw0: SROM version 1.3
rtw0: RF: GCT GRF5101, PA: Winspring WS9901
rtw0: digital PHY
rtw0: CS threshold 2
rtw0: attach failed, could not attach RF
ex0 at pci1 dev 12 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x78)
ex0: interrupting at irq 14
ex0: MAC address 00:b0:d0:87:57:f5
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801BA LPC Interface Bridge (rev. 0x02)
pciide0 at pci0 dev 31 function 1
pciide0: Intel 82801BA IDE Controller (rev. 0x02)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to compatibility mode
pciide0: primary channel ignored (not responding; disabled or no drives?)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel interrupting at irq 15
atabus0 at pciide0 channel 1
Intel 82801BA USB Controller (USB serial bus, revision 0x02) at pci0 dev 31 function 2 not configured
Intel 82801BA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
Intel 82801BA USB Controller (USB serial bus, revision 0x02) at pci0 dev 31 function 4 not configured
Intel 82801BA AC-97 Audio Controller (audio multimedia, revision 0x02) at pci0 dev 31 function 5 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43: AT Timer
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <_NEC DV-5700A, , 3.07> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
boot device: <unknown>
root on cd0a dumps on cd0b
warning: no /dev/console
#





-------------- next part --------------
A non-text attachment was scrubbed...
Name: Linux.rar
Type: application/octet-stream
Size: 226417 bytes
Desc: not available
Url : http://lists.chambana.net/mailman/archive/cu-wireless-dev/attachments/20051111/d4f35125/Linux-0001.obj


More information about the CU-Wireless-Dev mailing list