[CUWiN-Dev] Transmit power control / RSS measurement

[Jeongkeun Lee]

> And the tpcscale option accepts only five integers 0 to 4 as a valid
> argument. The default is 0 and it is the highest. As I increased the
> tpcscale value one by one at the transmitter, the RSSI at the receiver
> (which was very close to the transmitter) showed 2~3 dB degradation.
> 
The above mention might be ambiguous.
In accordance with the Dave's comment, the tpcscale 0 translates to the
highest tx power, and tpcscale 4 translates to the lowest tx power. 

-- JK