[CUWiN-Dev] Rev. 4085 disappearing default routes
David Young
dyoung at pobox.com
Tue Jul 18 20:00:25 CDT 2006
On Tue, Jul 18, 2006 at 05:08:06PM -0500, tom wrote:
> I put a build of rev. 4085 made by Dan Blah on the downtown Urbana network
> today. There's some funkiness with the routing that I don't understand.
The wrong SSID, and a missing 10/16 address do not help:
ath0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
ssid domainname.tld
powersave off
bssid 02:02:6f:20:ed:44 chan 11
address: 00:02:6f:20:ed:46
media: IEEE802.11 autoselect mode 11b adhoc
status: active
inet 169.254.237.70 netmask 0xffff0000 broadcast 169.254.255.255
inet6 fe80::202:6fff:fe20:ed46%ath0 prefixlen 64 scopeid 0x1
Looks like pulling nodeconfig up to the trunk may have broken stuff.
Bryan, do you have time to look at this?
I was looking at the routes in Zebra at 115 W. Main, (telnet localhost
2601; type password 'wireless'; type 'show ip route') and they were
all marked 'inactive', for no apparent reason at all. Stupid Zebra.
I restarted Zebra and many changed from 'inactive' to 'ath0', which is
what I expect.
Tom, on the gateway, you had accidentally started a second hslsd
instance by typing 'hslsd status'. I don't think it made any functional
difference. You meant '/etc/rc.d/hslsd status'. I will fix hslsd so
it errors-out if there are extra arguments, it's not user-friendly as-is.
Dave
--
David Young OJC Technologies
dyoung at ojctech.com Urbana, IL * (217) 278-3933
More information about the CU-Wireless-Dev
mailing list