[Makerspace-keymembers] Fwd: table saw

[Jeffrey Putney]

Ah sorry, I read that as "main" room and thought you meant the main room of
the makerspace. Yeah if there was someplace else to store it then I don't
have a strong opinion either way.

Jeff


On Wed, Feb 12, 2014 at 3:35 PM, Barry Todd <barry.todd at gmail.com> wrote:

> It is across from the Books for Prisoners.  Jeff, you recall we used the
> one from IMC to cut wood for the tables.  I don't imagine this will be much
> bigger.  I would assume it would only be used on occasion for big projects
> that more than one member of Makerspace would attend.  There is also some
> room in the area we have the firewall and switches, just down the hall
> North of Makerspace.  In one of the doors going east out of the Zine area.
>
> Regards,
>
>
>
> Barry Todd
>
> The Computer Geek
>
> (217) 898-6969
>
>
>
> On Wed, Feb 12, 2014 at 2:23 PM, Stewart Dickson <mathartspd at gmail.com>wrote:
>
>>  A table saw pretty much requires a shop-vac close at hand.   Some even
>> have vacuum attachments which
>> keep them cleaner.  Where is the maint area?
>>
>> -Stewart
>>
>>
>> On 2/12/14 2:14 PM, Jeffrey Putney wrote:
>>
>> It might be kinda big, depending on the model. Also they can be very
>> messy and dangerous. We're not quite setup to be a wood shop. This idea
>> concerns me a bit.
>>
>>
>> On Wed, Feb 12, 2014 at 2:10 PM, Emily Knox <emilyknox at gmail.com> wrote:
>>
>>> It sounds good to me--just wanted to make sure it wasn't too big.
>>>
>>>
>>> On Wed, Feb 12, 2014 at 1:55 PM, Barry Todd <barry.todd at gmail.com>wrote:
>>>
>>>> We can store it in the maint area if needed.
>>>>
>>>>    Regards,
>>>>
>>>>
>>>>
>>>> Barry Todd
>>>>
>>>> The Computer Geek
>>>>
>>>> (217) 898-6969
>>>>
>>>>
>>>>
>>>>   On Wed, Feb 12, 2014 at 1:55 PM, Barry Todd <barry.todd at gmail.com>wrote:
>>>>
>>>>> I think this is a great gift.  Thanks
>>>>>
>>>>>    Regards,
>>>>>
>>>>>
>>>>>
>>>>> Barry Todd
>>>>>
>>>>> The Computer Geek
>>>>>
>>>>> (217) 898-6969
>>>>>
>>>>>
>>>>>
>>>>>  On Wed, Feb 12, 2014 at 1:08 PM, Jeffrey Putney <quaker at gmail.com>wrote:
>>>>>
>>>>>>  Sent from an android.
>>>>>> ---------- Forwarded message ----------
>>>>>> From: "Sasha Rubel" <sasha at sasharubel.com>
>>>>>> Date: Feb 12, 2014 12:49 PM
>>>>>> Subject: table saw
>>>>>> To: <makerspaceu at gmail.com>
>>>>>> Cc:
>>>>>>
>>>>>> We have a fairly nice table saw given to us by a friend who worked on
>>>>>> sets for Krannert. I can check on the make and model later today. My
>>>>>> question: would you accept this as a donation? It would need to be picked
>>>>>> up. Or you could use it to raise funds for your Makerspace, possibly
>>>>>> offering it to participants in an auction, or for a reasonable price?
>>>>>>
>>>>>> Just a thought, wanted to run this by you.
>>>>>>
>>>>>> All best,
>>>>>> Sasha Rubel
>>>>>>
>>>>>>  _______________________________________________
>>>>>> Makerspace-keymembers mailing list
>>>>>> Makerspace-keymembers at lists.chambana.net
>>>>>> https://lists.chambana.net/mailman/listinfo/makerspace-keymembers
>>>>>>
>>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Makerspace-keymembers mailing list
>>>> Makerspace-keymembers at lists.chambana.net
>>>> https://lists.chambana.net/mailman/listinfo/makerspace-keymembers
>>>>
>>>>
>>>
>>
>>
>>  --
>> Jeffrey Putney
>> Senior Software Engineer
>> Diagnostic Photonics
>> 217-766-6580
>>
>>
>> _______________________________________________
>> Makerspace-keymembers mailing listMakerspace-keymembers at lists.chambana.nethttps://lists.chambana.net/mailman/listinfo/makerspace-keymembers
>>
>>
>>
>> _______________________________________________
>> Makerspace-keymembers mailing list
>> Makerspace-keymembers at lists.chambana.net
>> https://lists.chambana.net/mailman/listinfo/makerspace-keymembers
>>
>>
>


-- 
Jeffrey Putney
Senior Software Engineer
Diagnostic Photonics
217-766-6580
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.chambana.net/pipermail/makerspace-keymembers/attachments/20140212/d5eefad7/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2195 bytes
Desc: not available
URL: <http://lists.chambana.net/pipermail/makerspace-keymembers/attachments/20140212/d5eefad7/attachment-0001.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2195 bytes
Desc: not available
URL: <http://lists.chambana.net/pipermail/makerspace-keymembers/attachments/20140212/d5eefad7/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 9958 bytes
Desc: not available
URL: <http://lists.chambana.net/pipermail/makerspace-keymembers/attachments/20140212/d5eefad7/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 9958 bytes
Desc: not available
URL: <http://lists.chambana.net/pipermail/makerspace-keymembers/attachments/20140212/d5eefad7/attachment-0003.png>