[Makerspace-keymembers] Expensive New Machine

[Gergana Slavova]

Forwarding Barry's response to the group.  See below.

If it's an open design like our current 3D printer, we can easily cord the
cable lock through and attach it to the table.

~Gergana

On Mon, Mar 9, 2015 at 2:48 PM, Barry Todd <barry.todd at gmail.com> wrote:

> I am not sure if a laptop lock cable will be able to be used to the best
> effectiveness unless it specifies the device has that option for security.
> We may have to come up with a Makeshift option to get the best security.
> Which model are we getting by the way?
> On Mar 9, 2015 11:53 AM, "Gergana Slavova" <gergana.s.slavova at gmail.com>
> wrote:
>
>> I'm fine with buying a laptop lock cable and tying the machine to the
>> table it'll sit on.
>>
>> Same with reporting our equipment to the IMC.  Might be a good way to
>> push for our room to get updated locks first.
>>
>> ~Gergana
>>
>> On Sun, Mar 8, 2015 at 8:40 PM, Emily Knox <emilyknox at gmail.com> wrote:
>>
>>> Hey all,
>>>
>>> Since we're getting an expensive new machine, I have two thoughts.
>>>
>>> 1. Is it possible to get something like a laptop lock for it?  I know
>>> it's going to be big but that might give me a bit of piece of mind .
>>>
>>> 2.  We should report this to the IMC for insurance purposes.  (I can do
>>> that if we decided that it makes sense to do so.  We also might want to let
>>> them know the about the vinyl cutter and our new sewing machines.)
>>>
>>> Emily
>>>
>>> _______________________________________________
>>> Makerspace-keymembers mailing list
>>> Makerspace-keymembers at lists.chambana.net
>>> https://lists.chambana.net/mailman/listinfo/makerspace-keymembers
>>>
>>>
>>
>> _______________________________________________
>> Makerspace-keymembers mailing list
>> Makerspace-keymembers at lists.chambana.net
>> https://lists.chambana.net/mailman/listinfo/makerspace-keymembers
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.chambana.net/pipermail/makerspace-keymembers/attachments/20150309/4d0e08e6/attachment.html>