[rfu-automation] Re: [Rfu-station] Who rewired CD2?

rfu-station at lists.chambana.net rfu-station at lists.chambana.net
Fri Mar 23 17:58:31 CDT 2007


I didn't use CD2 on my show Thursday morning, so I can't say one way
or the other whether it had been changed at that point or not.

tom g

On 3/23/07, rfu-station at lists.chambana.net
<rfu-station at lists.chambana.net> wrote:
> When Jim & I came in to do the Sonic Asylum at 8 pm Wednesday night, we
> found (after some dead air time) that cd 2 was wired into the alternate
> input (labeled turntable), while cd 1 was in the conventional position.
> We used it that way and should have notified the list of this unusual
> wiring.  Apologies for that.  So, if this is the rewiring being referred
> to below, it happened before 8 Wednesday night.
>
> Fred Wilkinson
> Chief Deputy Circuit Clerk
> Champaign County Circuit Clerk's Office
> 101 E. Main Street
> Urbana, Illinois 61801
> (217) 384-3767
> e-mail - fwilkinson at co.champaign.il.us
>
> -----Original Message-----
> From: rfu-station-bounces at lists.chambana.net
> [mailto:rfu-station-bounces at lists.chambana.net] On Behalf Of
> rfu-station at lists.chambana.net
> Sent: Friday, March 23, 2007 2:03 PM
> To: rfu-station at lists.chambana.net
> Subject: RE: [Rfu-station] Who rewired CD2?
>
> Not I said the Fox...
>
>
>
> -----Original Message-----
> From: rfu-station-bounces at lists.chambana.net
> [mailto:rfu-station-bounces at lists.chambana.net] On Behalf Of
> rfu-station at lists.chambana.net
> Sent: Friday, March 23, 2007 1:42 PM
> To: rfu-station at lists.chambana.net
> Subject: RE: [Rfu-station] Who rewired CD2?
>
> It wasn't me, sorry.
>
> Ordena
>
> -----Original Message-----
> From: rfu-station-bounces at lists.chambana.net
> [mailto:rfu-station-bounces at lists.chambana.net] On Behalf Of
> rfu-station at lists.chambana.net
> Sent: Friday, March 23, 2007 12:11 PM
> To: rfu-station at lists.chambana.net
> Subject: [Rfu-station] Who rewired CD2?
>
> At the very least,  you need to leave a note!
>
> Not everyone can figure out what buttons to press and perhaps can't
> trace
> wiring the to the back of the mixer board.
>
> - Ken
>
> _______________________________________________
> Rfu-station mailing list
> Rfu-station at lists.chambana.net
> http://lists.chambana.net/cgi-bin/listinfo/rfu-station
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 268.18.17/730 - Release Date:
> 3/22/2007
> 7:44 AM
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 268.18.17/730 - Release Date:
> 3/22/2007
> 7:44 AM
>
>
> _______________________________________________
> Rfu-station mailing list
> Rfu-station at lists.chambana.net
> http://lists.chambana.net/cgi-bin/listinfo/rfu-station
>
> _______________________________________________
> Rfu-station mailing list
> Rfu-station at lists.chambana.net
> http://lists.chambana.net/cgi-bin/listinfo/rfu-station
>
> This electronic message and any attached files contain information intended for the exclusive use of the individual or entity to whom it is addressed and may contain information that is proprietary, privileged, confidential and/or exempt from disclosure under applicable law.  If you are not the intended recipient, you are hereby notified that any viewing, copying, disclosure or distribution of this information may be subject to legal restriction or sanction and is strictly prohibited.  If you have received this communication in error, please notify the sender by return electronic message or telephone, and destroy the original message without making any copies.
> _______________________________________________
> Rfu-station mailing list
> Rfu-station at lists.chambana.net
> http://lists.chambana.net/cgi-bin/listinfo/rfu-station
>
_______________________________________________
Rfu-station mailing list
Rfu-station at lists.chambana.net
http://lists.chambana.net/cgi-bin/listinfo/rfu-station


More information about the rfu-automation mailing list