[Commotion-admin] [commotion-router] Cli (#127)

[Dan Staples]

does not work. I ran through the process with reasonable values, and the mesh interface does not get an IP address after it is finished. This is the output from the last part of the setup wizard:

New settings applied.


All settings saved.


Restarting networking.


Configuration file: /var/run/hostapd-phy0.conf
Using interface wlan0 with hwaddr 24:a4:3c:46:32:ff and ssid "dandesk"
wlan0: interface state UNINITIALIZED->ENABLED
wlan0: AP-ENABLED 
Command failed: Not found
Successfully initialized wpa_supplicant
Command failed: Not found


---
Reply to this email directly or view it on GitHub:
https://github.com/opentechinstitute/commotion-router/pull/127#issuecomment-71076987
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.chambana.net/pipermail/commotion-admin/attachments/20150122/4edaf0d9/attachment.html>