[Commotion-discuss] Bridge Ethernet and Mesh Interfaces
Chris S. Munz-Michielin
christopher at ve7alb.ca
Sat Jan 21 18:19:15 UTC 2017
Hi All,
I have a bit of a non-standard configuration and would like to know if
what I would like is possible.
I have a Nanostation M2 colocated on the roof of a local datacenter,
connected back to a Mikrotik rb2011 which routes to the Internet, as
well as several other amateur radio networks. I currently have the M2
flashed with commotion firmware and have the mesh interface and the two
Ethernet interfaces bridged together. The Mikroitk RB2011 has been
assigned a 100.64.0.0/10 IP and can successfully communicate with the M2
AND with mesh devices.
What I would like to do is have the M2 advertise as a gateway to all
mesh clients, however, that does not appear to be possible to configure
via the GUI. when I go to Basic setup -> Additional Network Interfaces
and UNSELECT the option to mesh with other devices and set the DHCP
otpion to 'Do nothing with DHCP' I receive the following error:
Failed to execute cbi dispatcher target for entry '/admin/commotion/basic/addtl_net_ifaces'.
The called action terminated with an exception:
/usr/lib/lua/luci/model/cbi/commotion/basic_ani.lua:67: bad argument #1 to 'ipairs' (table expected, got string)
stack traceback:
[C]: in function 'assert'
?: in function 'dispatch'
?: in function <?:194>
Any Ideas on how to proceed?
Cheers!
Chris
More information about the Commotion-discuss
mailing list