[Cu-wireless] Seial PCMCIA for Soekris 4521?

[niteshad at whopper.de]

Stephan,

Since AFAIK you only need one wireless card for your war driving rig,
perhaps you could install a PCMCIA serial card in the second slot for your
terminal?  Below, is some information that I cribbed from David Hind's Linux
PCMCIA drivers documentation.  It's available on sorceforge; search for
"supported.cards".  

<snip>

Modem and serial cards:

	[ Virtually all modem cards, simple serial port cards, and
	digital cellular modems should work.  The only exceptions are
	so-called "WinModems" that require special drivers.  ISDN
	modems that emulate a standard UART are also supported.  Some
	Winmodem drivers do exist (i.e., the ltmodem driver for Lucent
	chipsets).  For more information about WinModems, drivers,
	etc, see either http://www.o2.net/~gromitkc/winmodem.html,
	http://www.linmodems.org, or http://linmodems.technion.ac.il ]

	[serial_cs driver] [x86,axp,ppc,smp]
	Advantech COMpad-32/85 dual port, COMpad-32/85B-4 quad port
	Argosy dual serial
	Black Box I114A RS-422/485
	Brain Boxes 2-Port RS-232
	Brain Boxes BL-500 Bluetooth Adapter
	National Instruments PCMCIA-232, PCMCIA-232/2, PCMCIA-232/4
	National Instruments PCMCIA-485, PCMCIA-485/2
	Omega Engineering QSP-100
	Quatech, IOTech dual RS-232 cards
	Quatech quad RS-232 card, dual and quad RS-422 cards
	Socket Communications dual RS-232 card
	Trimble Mobile GPS

	[serial_cb driver] [x86]
	Xircom RBM56G, CBM56G

</snip>

regards,

Mark

-- 
Sent through Global Message Exchange - http://www.gmx.net