[CUWiN] DHCPD setup

[Tim]

Hello,

I'm having some problems getting the DHCP server working with wireless.
I've configured and started the interface and the daemon, but my Windows
client can't seem to connect with cuw. Below is my configuration. I'm
obviously missing something. Any suggestions would be appreciated.

Thanks,
Tim.
---------------------
#ifconfig ath0
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        ssid cuw
        powersave off
        bssid 02:02:6f:20:f8:26 chan 11
        address: 00:02:6f:20:f8:26
        media: IEEE802.11 autoselect adhoc
        status: active
        inet 10.0.151.4 netmask 0xffff0000 broadcast 10.0.255.255
        inet6 fe80::202:6fff:fe20:f826%ath0 prefixlen 64 scopeid 0x1

# cat /etc/dhcpd.ath0
# interface ath0 configured by /etc/rc
subnet 10.0.0.0 netmask 255.255.0.0 {
        # Let the DHCP server on-site have the first shot.
#       min-secs 1;
        # Give short-lived leases so that a DHCP server on-site
        # has a good shot at taking over from us.
#       max-lease-time 60;
        pool {
                # do not answer our own requests.
                deny members of "cuw-clients";
                range 10.0.151.10 10.0.151.253;
                option routers 10.0.151.4;
                option domain-name "cuwireless.net";
                # ns.cu.groogroo.com
                option domain-name-servers 64.5.70.195;
        }
}

# /usr/sbin/dhcpd ath0
Internet Software Consortium DHCP Server V3.0.1rc11
Copyright 1995-2003 Internet Software Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP
Wrote 0 leases to leases file.
Listening on BPF/ath0/00:02:6f:20:f8:26/10.0.0/16
Sending on   BPF/ath0/00:02:6f:20:f8:26/10.0.0/16
Sending on   Socket/fallback/fallback-net