[Imc-makerspace] BoingBoing: IEEE Spectrum: basics for a maker workbench
Stewart Dickson
MathArt at Emsh.CalArts.edu
Tue Aug 9 09:20:41 CDT 2011
http://www.facebook.com/boingboing
IEEE Spectrum: basics for a maker workbench
<http://feeds.boingboing.net/%7Er/boingboing/iBag/%7E3/N4ojHl2tHfE/ieee-spectrum-basics-for-a-maker-workbench.html>
IEEE Spectrum put together a solid "DIY Essentials" list for a
hardware/electronics workbench. From IEEE Spectrum: Most of us start out
using batteries or cannibalizing power adapters, but a good bench Power
Supply lets you control voltages precisely as well as measure and limit
the amperage flowing through the circuit. You can get a reasonable
single-voltage supply for $120 or so, such as the 18-volt, 3-ampere
supply made by Extech Instruments....
Source: Boing Boing <http://boingboing.net/>
Published: 2011-08-09 03:47:43 GMT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.chambana.net/pipermail/imc-makerspace/attachments/20110809/fba28533/attachment.html>
More information about the Imc-makerspace
mailing list