[IMC-Tech] Re: [IMC-Space] Not going to be able to make the meeting
tonight...
Mike Lehman
rebelmike at earthlink.net
Thu Mar 23 22:03:12 CST 2006
Dan,
I took a look and this looks OK. Space has signed off on it.
This presumes that the entry line will be buried from the box over to
the side of the building. There is a basement window on the west side of
the building (into Sandra's studio) where the water meter reading line
comes out. I presume that the hole it comes out of is big enough to run
the cabling entry line through also. This avoids making any new holes.
If another hole needs to be made in that window frame, that is OK.
However, if a hole needs to be made anywhere else, then please check
back with me.
The plan for how the line runs inside the building sounds good. If you
need to alter its location, use good judgment, but I don't anticipate
there will be any issues that need further review as long as it's run
where people won't snag it.
Mike Lehman
dan blah wrote:
> I have a 9AM meeting tomorrow that I am of course not prepared for.
>
> The only thing i would like to see O.K.ed is the entry location for
> the insight cable line. The current cable location is the shoddy
> green box on the northwest corner of the IMC property inside of the
> sidewalk. The plan was to run a trench from there into one of the
> basement windows thus removing any cable on the side of the building.
> Not knowing what can and can't be done on the outside I would like
> this addressed. From there the cable would run from the broiler room
> ceiling into the RFU studio (hole already exists), into the audio
> production room (hole already exists), up into the ceiling and into
> the *i think* already approved server room which is the old peep
> space. For the sake of stating, with the possible exception of
> creating or finding an in from outside to the broiler room, this
> installation requires no new holes or drilling inside.
>
> If this is fine with space I will then bring that approval and the
> associated monthly and installation costs to steering next Thursday
> for approval.
>
> --
> Daniel
More information about the IMC-Tech
mailing list