[CUWiN-Dev] equipment purchase options

[Bob Ney]

It will run on pretty much any voltage within reason. I dismantled one and
it has no active components on it. Just a fuse, a diode for the LED
current limiting and a few capacitors between the spare leads of the RJ
and ground


This seems nice, but remember you need two for each node.
>
> According to this:
> http://store.microcom.us/ebu10101.html
> ... it operates at 48V.  Maybe it means *up to* 48V.  No mention of
> current capacity.
>
> Heck, if you're going to be putting on the connectors anyway, just an RJ45
> wall jack box ($0.95), and it saves you terminating two cable ends with
> jacks.  Less fuss and cost.
>
> I'll bet the Professor could make one out of coconuts.  Or George Bush
> could imagine one out of thin air!
>
> Best,
>
> Carl Cook
>
>
> On Friday 01 April 2005 16:54, Bob Ney wrote:
>> The only power injector I found in the Metrix catalog was $30.
>> I have been buying the ones in the below link from wlanparts.com for
>> $9.00
>> and they work well
>> with various POE capable hardware. I have even put two of them back to
>> back
>> to
>> use as a power picker at the top as well as an injector at the bottom.
>> http://www.wlanparts.com/product/NL2611CB3POE
> _______________________________________________
> CU-Wireless-Dev mailing list
> CU-Wireless-Dev at lists.cuwireless.net
> http://lists.chambana.net/cgi-bin/listinfo/cu-wireless-dev
>