[CUWiN-Dev] HSLSD Not Sending HSLS(9191) Packets

[Socrates Socrates]

# ifconfig -a
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        ssid cuwireless.net
        powersave off
        bssid 02:0c:f1:df:a9:9e chan 11
        address: 00:02:6f:20:ed:6e
        media: IEEE802.11 autoselect mode 11b adhoc
        status: active
        inet 10.0.237.110 netmask 0xffffffff broadcast 10.0.237.110
        inet alias 169.254.237.110 netmask 0xffff0000 broadcast
169.254.255.255
        inet6 fe80::202:6fff:fe20:ed6e%ath0 prefixlen 64 scopeid 0x1
        inet6 fdb4:542d:dc11:ed6e:202:6fff:fe20:ed6e prefixlen 64
sip0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 00:00:24:c2:b1:14
        media: Ethernet autoselect (none)
        status: no carrier
        inet 10.177.20.254 netmask 0xffffff00 broadcast 10.177.20.255
        inet6 fe80::200:24ff:fec2:b114%sip0 prefixlen 64 scopeid 0x2
        inet6 fdb4:542d:dc11:b114:200:24ff:fec2:b114 prefixlen 64
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33192
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
pflog0: flags=0 mtu 33192


On 2/15/07, Socrates Socrates <socrates.socrates at gmail.com> wrote:
>
> On CUWiN box:
> 'telnet localhost 2601' expects a password, and I tried, zebra, quagga,
> Zebra, Quagga, 025XB1zOjA3B., etc,  none of which works.
> I checked (ps aux) and zebra is sure running.
>
> On my Laptop:
> The code base (Linux port attempt from the Telcordia guys) from which I
> started working does the routing directly using ioctl calls instead of
> Zebra. Could my problems be here???
>
> Kind regards;
> Lawrence
>
>
> On 2/14/07, David Young <dyoung at pobox.com> wrote:
> >
> > On Tue, Feb 13, 2007 at 02:03:59PM +0200, Socrates Socrates wrote:
> > > Hi Dave
> > >
> > > I'd a closer look at the debug output, the message
> > "hsls_interface_recv:
> > > cannot resolve source 169.254.237.110" is printed whenever the Laptop
> > > receives a packet from CuWiN box and NOT just at the start.
> > >
> > > Well, hslsd is certainly misbehaving.  Both the CUWiN box and my
> > laptop do
> > > not update their routing tables with the other's lan addresses.
> > > That is, from my laptop
> > > "./hslsd -d -c 127.0.0.1 -L all -l rx -l tx -l err -l warn -l
> > malformed -l
> > > lsu_ack -f inet -t stub -i eth0 -p 146.64.19.215/24 -f inet -t ptmp -i
> > eth1"
> > >
> > > does  not "cause" the CUWiN to have an entry to 146.64.19.215. The
> > same with
> > > the Laptop, it doesn't update it's routing table with 10.177.20.254from
> > > CUWiN.
> >
> > Log into each of your routers, and connect to zebra with 'telnet
> > localhost 2601'.  Type 'show ip route'.  Also, run 'ifconfig' ('ifconfig
> >
> > -a' on NetBSD) on each of your routers.  Send this information to us.
> > I want to make sure that you have assigned all of the right IP numbers
> > to your routers' interfaces.  I also want to make sure that zebra is
> > receiving routes from hslsd.
> >
> > Dave
> >
> > --
> > David Young             OJC Technologies
> > dyoung at ojctech.com      Urbana, IL * (217) 278-3933
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.chambana.net/mailman/archive/cu-wireless-dev/attachments/20070215/59d74e18/attachment.html