[Commotion-dev] OpenWRT AP not functioning

[Ben West]

Whoops, and please disregard the sending email address from my last post.
Silly GMail ...

On Wed, Jul 24, 2013 at 1:50 PM, CAMP Events Coordinator <
coordinator at stlcamp.org> wrote:

> I have working Nanostation Loco M2 right now, running Commotion-OpenWRT
> compiled from a build tree pinned to AA r36681, including the packages feed.
>
> Is there anything I could share from my build tree to help troubleshoot?
>
>
> On Wed, Jul 24, 2013 at 1:35 PM, Dan Staples <
> danstaples at opentechinstitute.org> wrote:
>
>> Just built Commotion-OpenWRT from scratch today, and after going through
>> quickstart, the AP is not functioning. No beacons, and we can't even
>> connect to it as you would with an AP with a hidden SSID. It just isn't
>> working. We've tested on multiple picostation routers, with same results.
>>
>> ifconfig reports the access point interface is up, it has an IP address,
>> and even iwinfo reports it as being fully functioning. Yet...there are
>> no beacon frames and we cannot connect to it.
>>
>> Curiously, the ad-hoc interface is working just fine.
>>
>> Anyone else run into this, or can confirm? Both OpenWRT core feed and
>> the packages feed are pinned to known-working revisions.
>>
>> --
>> Dan Staples
>>
>> Open Technology Institute
>> https://commotionwireless.net
>> OpenPGP key: http://disman.tl/pgp.asc
>> Fingerprint: 2480 095D 4B16 436F 35AB 7305 F670 74ED BD86 43A9
>> _______________________________________________
>> Commotion-dev mailing list
>> Commotion-dev at lists.chambana.net
>> https://lists.chambana.net/mailman/listinfo/commotion-dev
>>
>>
>
>
> --
> Ben West
> westbywest at gmail.com




-- 
Ben West
http://gowasabi.net
ben at gowasabi.net
314-246-9434
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.chambana.net/pipermail/commotion-dev/attachments/20130724/a45a0f3d/attachment.html>