[Commotion-dev] OpenWRT AP not functioning

[CAMP Events Coordinator]

I have working Nanostation Loco M2 right now, running Commotion-OpenWRT
compiled from a build tree pinned to AA r36681, including the packages feed.

Is there anything I could share from my build tree to help troubleshoot?

On Wed, Jul 24, 2013 at 1:35 PM, Dan Staples <
danstaples at opentechinstitute.org> wrote:

> Just built Commotion-OpenWRT from scratch today, and after going through
> quickstart, the AP is not functioning. No beacons, and we can't even
> connect to it as you would with an AP with a hidden SSID. It just isn't
> working. We've tested on multiple picostation routers, with same results.
>
> ifconfig reports the access point interface is up, it has an IP address,
> and even iwinfo reports it as being fully functioning. Yet...there are
> no beacon frames and we cannot connect to it.
>
> Curiously, the ad-hoc interface is working just fine.
>
> Anyone else run into this, or can confirm? Both OpenWRT core feed and
> the packages feed are pinned to known-working revisions.
>
> --
> Dan Staples
>
> Open Technology Institute
> https://commotionwireless.net
> OpenPGP key: http://disman.tl/pgp.asc
> Fingerprint: 2480 095D 4B16 436F 35AB 7305 F670 74ED BD86 43A9
> _______________________________________________
> Commotion-dev mailing list
> Commotion-dev at lists.chambana.net
> https://lists.chambana.net/mailman/listinfo/commotion-dev
>
>


-- 
Ben West
westbywest at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.chambana.net/pipermail/commotion-dev/attachments/20130724/b767db6a/attachment.html>