[Commotion-discuss] Some pre-experimentation mesh hardware

[LuigiScop]

Hi Dan,
I did the first experiment with a new Picostation.
I flashed  Commotion firmware following the  guidelines available on the Commotion blog .Easy.
I have set thePicostation as acces point ,just to start.
The difficulty arises when I go through the Commotion sofware administartion interface.
Is there any user manual ?.Also draft.
Very difficult for me to proceed without guidelines and a general vison of what can be done to set a meshed network with Commotion software.
I could  ,but I wouldn’t  like to spend too much time on this if there is already something available .
Thanks.

Luigi





Message: 1
Date: Tue, 09 Apr 2013 10:08:08 -0400
From: Dan Staples <danstaples at opentechinstitute.org>
To: commotion-discuss at lists.chambana.net
Subject: Re: [Commotion-discuss] Some pre-experimentation mesh
hardware
Message-ID: <516420C8.8010503 at opentechinstitute.org>
Content-Type: text/plain; charset=UTF-8

Hi Luigi,

Yes, both Nanostation models should work with Commotion. For a minimal
hardware, I would suggest the picostation. It's what we do our primary
development on, and is relatively cheap. Let me know if you have any
other questions!

Dan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.chambana.net/pipermail/commotion-discuss/attachments/20130422/77d0f5f2/attachment.html>