[UCIMC-Tech] Phone Ringer Flasher Cross-Wired
Stewart Dickson
mathartspd at gmail.com
Sun Aug 5 13:56:28 UTC 2012
Thanks, Chris,
That sounds like an improvement.
-Stewart
On 8/4/12 9:05 PM, Chris Ritzo wrote:
> Today some work was done on the WRFU phone line, and most issues
> should be resolved, with the exception of the phone flasher.
>
> The existing phone flasher and splitter was configured using a DSL
> splitter of some sort, I believe intended to handle both lines. When
> the WRFU line was called, the phone itself rang. When the IMC line was
> dialed, the flasher flashed.
>
> To alleviate this issue, we have ordered a more in-line phone flasher
> which I'll install early next week. The phone is currently patched
> into the board as well, so if someone can confirm that the WRFU line
> feeds properly into the board as currently connected, that would be
> awesome.
>
> Additionally, I've removed some extra phone cables under the desk and
> cleaned things up a bit. Please also note that we will also be
> removing the openWRFU access point soon, after ensuring that wifi
> access in the lobby and studio area are covered by the now
> building-wide standard openUCIMC network.
>
> CR
>
>
> On Thu, Aug 2, 2012 at 12:28 PM, Stewart Dickson <mathartspd at gmail.com
> <mailto:mathartspd at gmail.com>> wrote:
>
> I'm not there right now, but as I recall, the RJ-45 line splitter
> looked funny. Maybe you've got 2 lines on the cable going into
> the splitter, and so a different line is going to the ringer
> flasher than is going to the phone? That would make sense to
> me. You actually want the same line going to the flasher as the
> phone. A different kind of RJ-45 line splitter which does this is
> probably what it needs.
>
> -Stewart
>
> On Thu, Aug 2, 2012 at 11:07 AM, Chris Ritzo
> <chris.ritzo at gmail.com <mailto:chris.ritzo at gmail.com>> wrote:
>
> Um, then someone must have changed the configuration that
> Barry Todd and I installed.
>
> I'll look at it again. Or maybe you want to.
>
>
> On Thu, Aug 2, 2012 at 10:44 AM, Stewart Dickson
> <mathartspd at gmail.com <mailto:mathartspd at gmail.com>> wrote:
>
> Um, I sat in the WRFU studio and called 344-8820 on the
> studio phone and watched the ringer light flash.
> Then I dialed the FAX number (WRFU) *344.2536 *and got a
> busy signal on that line.
>
> -Stewart
>
>
> ...
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.chambana.net/pipermail/imc-tech/attachments/20120805/4f19e992/attachment.html>
More information about the IMC-Tech
mailing list