RE [IMC] desk donation

[Brian Hagy]

that's a much better idea.  have them there, laid out at least, so we can
mark where the support legs will connect with the wall, and thus won't need
to actually put them in until after the drill is done for everything.


brian

On Tue, 13 Feb 2001, Ellen Knutson wrote:

> I do think its great that OJC had donated desks!! YEA!!
>
> But I feel really quite strongly that they should NOT be installed before
> the Saturday wiring party. The production room is going to be a big focus
> for a lot of the wiring and I think having desks that are screwed into the
> walls (ie the can't be moved) would cause a huge headache and may indeed
> slow quite a bit of the process down. I think that room is going to present
> enough challanges as it is. However, that being said, I see Brian's
> concern, but I think that can be addressed by having the desks at the space
> so we know how big they are and make a plan for were they will be screwed
> in to the walls. This way we make sure that the wiring plan and the desks
> can happy coexist. But again I want to say that in my experience ANY thing
> that can't be moved is just going to cause hassles.
>
> Ellen
>
> On Mon, 12 Feb 2001 Brian Hagy wrote:
>  >Superb!
>  >It would be really really really really really really (and so forth)
>  >useful to have them installed before the saturday wiring party, so that we
>  >know where we can install the cables in the production room (don't want to
>  >be drilling legs into electrical sockets...unless somebody has an
>  >alternate understanding of pain). of course, i would love to help,
>  >however, i'm only available to help on thursday nite (after 7ish).
>  >also, there seems to be a rather large generation of static electricity in
>  >the production room. has anyone else noticed this? any suggestions as to
>  >what we can do to ground the room better?
>  >brian
>  >
>  >On Mon, 12 Feb 2001, Danielle Chynoweth wrote:
>  > OJC has generously donated 3 wooden desks for the IMC production room.
>  > These desks were made by John Barclay and are to be screwed into the
>  > walls. Thay can be set at the perfect height for computer work and
>  > include lots of leg room.
>  >
>  > Please thank OJC staff when you see them.
>  >
>  > The desks will be brought over by Mike U and Brandon today.
>  >
>  > Is anyone up for installing them?
>  >
>  > -- danielle
>  >
>  >
>
>
>
> _______________________________________________
> Imc mailing list
> Imc at urbana.indymedia.org
> http://lists.groogroo.com/cgi-bin/listinfo/imc
>