[Commotion-discuss] Resetting commotion nodes to UBNT software

[Ben West]

The only way I know to flash UBNT devices from OpenWRT back to their stock
firmware is to put them in recovery mode via the reset button on the radio
itself, or using the reset button on the 1amp POE injector. OpenWRT itself
can't flash them back to stock firmware.

Once in recovery mode, the radio should respond to TFTP at IP address
192.168.1.20.
On Mar 18, 2015 2:47 PM, "Anthony S" <tony at rhicenter.org> wrote:

> We have been trying to restore the Ubiquiti settings/software on a current
> Commotion node.
> We have tried TFTP through a GUI, and the command line. We insured that we
> knew the IP address of the router, and set our computer to be on the same
> network.
> But, it wont work. We either are returned the message "Host is down" or
> "No route to host"
> Anyone have thoughts on how to make this work?
> thanks
> tony
>
> --
>
> *Anthony SchlossDirector of Community Initiatives*
> www.rhicenter.org
>
>
>
> _______________________________________________
> Commotion-discuss mailing list
> Commotion-discuss at lists.chambana.net
> https://lists.chambana.net/mailman/listinfo/commotion-discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.chambana.net/pipermail/commotion-discuss/attachments/20150318/01d4775b/attachment.html>